SELF-GUARD SG-3000 User's Guide

The Smallest, Wireless, Mobile, and Covert DVR in the WorldSELF-GUARDTMGeneral Version: SG-100, SG-200, and SG-300Special Version: SG-110, SG-210, and

19The list of the month and the year, which has recorded data shows on the screen. Allsaved data are arranged by the month and the year in a list. If

21minutes and 35 seconds from channel number 1. For 15224201.sgvx, ‘x’ means the fileis locked to protect from deleting. To lock or unlock the file, s

23Memory Card Slot: This is the place where you put in the standard RS-MMC memorycard. If you need to expand the memory from the built-in, internal me

25Battery Holder: When you load the battery into the Self-Guard, this place keeps a holdof the battery to the Self-Guard’s body. In order to settle th

27Select “RECORD” with the direction buttons and then press [ENT]. Then it shows thescreen that’s being recorded as below, and the Self-Guard starts t

29You can check on the camera’s recording location, and the operating status of it withthe Self-Guard’s LCD. When using multiple cameras, you can see

31• Green Colored Date: There exists saved data.• Black Colored Date: There exists no saved data.• Pink Colored Date: Cursor positionUse [ ] and [ ]◁▷

33<<: Move backward by 30 frames>>: Move forward by 30 frames|>: Move forward by 1 frame||, ->, => : Stop, Play, High-Speed Play;

35I-4. OPTIONSelect “OPTION” using the direction buttons, and then press [ENT]. Then the nextscreen appears in the LCD as below.Use [△] and [▽] to sel

37Be sure to turn off the cameras that are not connected to the Self-Guard in themenu.The types of external cameras can be set either in “NTSC” or “PA

3– Contents –INTRODUCTION ----------------------------------------------------------------------------------- 61. Precautions ------------------------

394-2-1-1. VIDEOThis function turns on and off recording moving images.Set it to off to record audio only (SG-200, SG-210, SG-300, SG-310 only).4-2-1-

41among from the blocks by using the direction buttons, and press [ENT] to select (redcolored O) or cancel (blue colored -) specific blocks. After sel

43O-OBUILT-IN→ USB → BUILT-INOOOBUILT-IN→ RS-MMC → USB → BUILT-INWhen “5.FILE LIM.” function is turned OFF, you cannot make “OVERWRITE”function turne

454-3. SEARCH SETSelect “3.SEARCH SET” using the direction buttons, and press [ENT]. Then the nextscreen appears in the LCD as below.4-3-1. REPEAT: OF

47If you turn off the Time Sync function, then it does not synchronize with the time even ifyou change the channels by pressing [ ], or press▽ “->

49This option turns on and off the USB function. When you are not using the USBmemory device, turn it off to save the battery. Do not insert or remove

51This information lists total capacity and used memory of each memory device.4-6-2. DATA FORMAT“DATA FORMAT” is to format the memories, and clear all

53You can prohibit people without the authority from accessing the Self-Guard bycreating a password for each function (BOOTING, OPTION, SEARCH, and RE

55the Self-Guard wake up and check if there is a motion. If there is no motion then theSelf-Guard goes into sleep-mode again, but if there is a motion

57This function decides on the audio recording methods. If this function is on, then theSelf-Guard starts to record sounds when it detects the sounds

5<< Important Notice >>9 The contents of this manual are subject to change without notice.9 IDView.com has the responsibilities as the man

592. TIME: 1When a motion is detected by the camera then the Self-Guard generates an alarm fromthe internal speaker. The duration of the alarm is from

61“UPGRADE” is to upgrade the Self-Guard’s software to its latest version by internet. Toaccess this upgrade function, Self-Guard must be connected wi

63USB memory in order to back up the data to the RS-MMC or USB memory under thecorrect Self-Guard’s name in the RS-MMC or USB memory devices. Of all t

65Select a Bluetooth number that you want to connect with your Self-Guard using [ ]△and [ ]▽ , and select “CONNECT” using [ ] and [ ]◁▷and then press

67This function is to find the Bluetooth ID for your Self-Guard. When you want to connectto the slave Self-Guards with your master Self-Guard, then yo

69To install the program, double-click SETUP icon. Then a new window appears asbelow, and starts installing the program.70Type in the serial number an

71 72When the processes above are finished, then the program installment is completed.

73Now you will see an icon for the program on the ground screen.Point the mouse to this icon, and double-click left side of the mouse, then a newwindo

75II-3. Other functionsa. SETUPYou can on and off the title to display the “Play status”, “Date/Time”.b. Date/TimeShows the date and time of your comp

77III. OTHERSIII-1. How to use Button Camera (SG-110, SG-210, SG-310 model only)1. Press [ENT] for 2 seconds to turn on the power.2. Connect Self-G

7¾ Never cover the AC/DC adaptor with a quilt, blanket, or other cover while itis in use, and do not use it near a heater.¾ At least once a year, unpl

79“TRANSMIT” modes. But the Self-Guards have this “automatic recovery function”,and free the users from the burden.z Self-Guard’s image from the camer

9power completely. Set the time to 0 to deactivate “AUTO POWER OFF”function.Caution: To maximize the life of the battery, do not turn off “AUTOPOWER O

112. FeaturesSelf-Guard is an extremely small digital recording system, which can digitally compress,store, search, and transmit/receive information s

133. Specifications and Comparison of each Model3.1 SpecificationsSECTION DESCRIPTION REMARKSInternal Storage DeviceBuilt-In Flash memory: 128 MB(up t

154. Applicationsz House, Apartment (Residential Areas), Hotel, School/University Facility,Daycare Center, Kindergartenz Laboratory, Hospital, Law Off

173. Use [△]and[▽] to select “D.DATE/TIME SET” and press [ENT].4. Use [ ] and [ ]◁▷to move the cursor to month, date, year, and time.5. Use [△]and[▽]